Sig P365 Slide Release Stuck Will Not Go All The Way Back Sear Is In “up” Position
Also, can't get the slide off of the frame, now. I have a new p365 ( born on date of july 2021) and with the magazine out the slide release is very hard to operate with one thumb, but doable. However when a magazine is.
SIG P365XMACRO STUCK SLIDE ISSUE EXPLAINED YouTube
Might need to flip the takedown lever and attempt to remove the slide again. Only thing i can suggest is remove the light, try racking the slide a hundred times, see if depressing the trigger on an empty chamber does anything, and attempt to break it down. After reassembly my slide is locked back and i can not move the slide release.
The release will not move down.
Normally, the barrel and slide have a little movement together, rearward before the barrel cams downward and the barrel and slide disengage. It looks like your disassembly lever came out of position. With the takedown in the open position the recoil spring will be. I go over the mechanics.
The slide sits about 1/8 from the back end of the frame, but racks ok and can be locked back with the release/catch. It should also remain down until it. Pulling the slide back won't allow you to push the slide release down? In this video, i share a method to remove the slide from the fcu should the mechanical parts inside ever fail.
SIG P365XMACRO STUCK SLIDE ISSUE EXPLAINED YouTube
I decided to install a wilson combat grip module on my p365.
Can you pull the slide back at all? My analysis led me to believe that this. If it's binding or stuck at the muzzle end it will prevent the slide from moving back. It may be out of place.
If you can pull the slide back and move the slide lock up to lock it back and then move the disassembly lever up to locked or down to take apart, then release slide lock. When you push down on the takedown lever, the takedown safety bar moves forward a bit and under the. The linked video by sig mechanics explains how to release the slide of a p365 if it becomes stuck on the fcu due to a parts failure. I don’t own one, but if the slide lock is stuck in the up position then something is wrong.
Sig P365 SAS Slide Stuck Closed on Live Round YouTube
Check the recoil guide rod.
I took a few pics of the slide stop lever and the takedown lever. It should easily push down and release the slide. Also, what were you doing right before it stuck.
Slide Catches / Slide Stops Sig Guy LLC
