Xtreme Bullets Reloading Data Need Load For An E 380 Auto 100 Gr Rnfp Bullet Texas Gun
That data fits right in with what will2. Modern bullets for the.38 spl. This data has been developed over the last 10+ years for the best performing loads.
9mm Xtreme 147gr + Titegroup Suggested Load Data reloading
To satisfy yourself as a responsible reloader, call xtreme and. Looking at the alliant online loading data, they show a max load of bullseye at 3.5 grains for a 158 grain swaged lead semi wadcutter bullet. I'm conducting an experiment and it would be helpful to have a.
We recommend keeping velocities to less than 1500 fps (feet per second).
Lswc, with an over all length of 1.225. I have some xtreme 124 gr rn and can't find load data from hodgdon. The powders i have on hand are; Lee manual has some load data for plated pistol bullets, including 200g, but only for accurate powders 2, 5 and 7.
I would never blindly trust load data from a forum without checking against published. I use 4.0gr of titegroup which chrono's at 1100 fps. I'm relatively new at this, having loaded about 6,000 rounds so far on my 650. What is your most accurate 9mm 124 grain load for plated bullets?
9mm Xtreme 147gr + Titegroup Suggested Load Data reloading
This is the best response i've got on loading xtreme 165 grain 9mm rn bullets to max pressure and velocity.
Except for one load of. Go to hodgdon.com and plug your powder and bullet weight to get your max and min. Has anyone out there had any experience. I load extreme 124gr bullets and i follow the hodgdon reloading advice which is to use lead bullet loads for plated bullets.
I want to keep the load around/under 1,600 fps.
Looking for load data for Xtreme bullets!
147 gr 9mm XTreme 1911Forum
