Sa 16 Dtc P004607 I Got Volvo D13 Fault Codes P242864 P208064
There are revisions for this error. P0047 is a diagnostic trouble code (dtc) for turbo/super charger boost control solenoid circuit low. This can be either an issue with the.
SA 16 DTC Fault Codes Explainer ⚡Volvo Mack ⚡ P113000 P20EE00 OTR
Any one has a link to fault codes for 2014 vnl with d13. If one was wanting to connect to. I have fault sa 16 dtc p200200 any idea?
I would then run a regen and monitor the t2 and 3 sensors and make sure they are running 850 plus.
Checked codes and gave me a p004607 which is a turbo actuator code. You can run the vgt function test with a scanner or pc or you can remove the act and check the sector shaft by hand to see if it moves freely. How did you correct it? It means that the actuator can not move the turbo and that there is a mechanical failure.
I would run the vgt test with a scan tool and make sure the turbo is not scratchy and has a full sweep. July, 14, 2014 added “obd13 format” fault code turbo inspection and replacement prevost vehicles description on the vehicles affected by this bulletin, perform a turbo. On my volvo, you can scroll through the menus until you get to diagnostics. then you choose ecu. then the. Ensure that you are connected directly to the diagnostic connector, not to an eld.

I have d13 engine Volvo 2014. Volvo D13 2014. SA 16 DTC P004607 I have
Too young to quit.too old to change.
I killed the power from the battery for a few minutes then turned back on and it started and no code. 2016 volvo vnl d13 engine. P004607 (for obd13 engines) if none of these fault codes are found, refer to special instructions in “estimated time”. This code indicates that the forward looking radar (flr) has not detected a target in an excessive amount of time or has become blocked.
When performing fault tracing for these dtcs, inspect the coolant cup plugs for signs of coolant or coolant residue on the turbo bearing housing in the cup plug areas. 2) follow detailed instructions provided in impact, under “service” tab. Mick,, i’ve got one last one for you for the day. Check the injector actuation percentage and see if it.

My 2014 Volvo Vnl red stop engine light come on and off. The code that
With the vgt fault and the ahi fault, those indicate you have an issue upstream.
When the flr has gone a. Your fault is for the vgt function of the turbo. To tell for sure there are 2 things you can do.

SA 16 DTC Fault Codes Explainer ⚡Volvo Mack ⚡ P113000 P20EE00 OTR