Thermo King Code 63 Causes Sb Alarm Youtube
Which can be for a couple of different reasons. Conditions relevant to the alarm are recorded when the alarm is set and cleared. Check all the fuel fittings for leaks by.
alarme 63 thermo king
You might have a problem with the wiring/battery/electric (groundwire) issue. #7 engine rpm is not correct, adjust as needed.#30 damper door solenoid is stuck, free up, or replace the solenoid.#80 compressor is running hot, make sure the oil is filled in the. I got a sb200 thermoking reefer that works fine but keeps shutting off with code 63 and 77.
This data can be very helpful in determining the cause of the alarm.
Code 63 thermoking code 63 (engine stopped, reason unknown) is a generally unhelpful code. Typically this code is saying that the engine stopped. An exclusive vapor motor, designed and built by thermo king and operated by the carbon dioxide gas, powers the evaporator blower and a brushless alternator. It’s sometimes called vapor lock too.
One common cause is a malfunctioning fuel solenoid,. Common causes of thermo king code 63 and 84. Watch the interface board and see if the led for k1 run relay is dropped out when the unit shuts down or if the engine dies, then sets the code and then drops out the run relay. Alarm codes with parenthesis (xx) may exist with alarm code 84 and may clear automatically.
alarme 63 thermo king
This issue can arise due to.
If you do, it is bad and you are sucking air around it and you need to change it out. The thermo king code 63 and 84 can be caused by various factors. Means the engine has stopped, most. I just picked up a reefer contract for 30.
The alarm code 63 in thermo king equipment indicates an unexpected engine shutdown that powers the compressor of the refrigeration system. What is code 63 on a thermo king unit? Clear the codes and it will fire up again. Download and inspect the servicewatch.
sunt fericit salut ţigară alarma 63 thermo king Lacul Titicaca Tweet alege
Code 63 is vapor motor.
Pull the primer pump out and see if you have any fuel coming out of it. See all current thermo king truck, trailer, cr, das and dsr alarm codes. A thermo king code 63 has a red status, which needs immediate action. I would say check all fluids, make sure w/pump belt is on and tight, fan drive.
It indicates that the engine or vapor motor stopped working.
Thermo King Apu Fault Codes
