P80 Slide Sticking Ported On Sct Frame R Polymer80
The gun shoots great, smooth and accurate. I have a slide drag issue but my trigger bar isn't getting hung up on the plunger. With the trigger pin you should wiggle.
Polymer 80 Glock 19 Complete Slide Assembly P80PS9CSA
I went ahead to disassembly the slide first by pulling the trigger, depress the. The hump in the trigger bar is catching on the chamber opening section of the slide and. I bought two p80 complete uppers last black friday sale for half price.
However, i’m having some trouble getting the slide to go on correctly.
I just finished assembling my first p80 g19. The slide release spring should curve around the end of the slide release and arc upwards. I’ve currently built a p80 g17 with both the frame and slide completed. I checked the trigger reset, and it seemed fine.
In a pinch you can punch both all 4 of p80 pins out and literally pull the slide off the frame. If the p80 slide is working on your glock you can be pretty sure the problem is with your build. Problem fixed itself after a thorough oiling, racking and dry fire, then like 50rds,. Mine seemed to get hung up but if i put a little pressure on the rear of the slide it would fall the rest of the way.
Gen 4 Glock slide on a P80? Everything you need YouTube
That was bs answer to me so i junked the p80 and bought a grey.
The issue i am having is the slide locks back with 1 round left in the. When i attach the slide to the. P80 said thats normal and that i should take the block out and grind the block at a taper until it slides freely. There are no polymer rail sections that hold the slide to the frame, just the front and real rails which.
On my g26 build the trigger works and resets fine, but when you pull the slide all the way to the rear it gets stuck just a tiny bit before the slide stop would catch in its notch. Well i dry fired it twice and it wouldn’t go into battery, negotiated the slide off and the striker doesn’t move. I had similar issues, back plate rubbed and bound on the trigger housing when the slide went back (wouldn’t go back to battery and i had to strip to unstick it), and the slide and. I have built a p80 pf940cl, which is the glock 19 frame with a 17 slide.
Polymer 80 Glock 19 Complete Slide Assembly P80PS9CSA
Popped the backplate off and the sleeve moves around but that pin is rotated to.
You should see the tip. From first glance i can also see that the slide seems to be a little far back, meaning that there’s a part of the barrel and rod that’s poking out. The end of the spring should stick out towards the rear.
Ported P80 Slide on SCT frame r/polymer80
