John Deere Stanadyne Injection Pump Troubleshooting Oem Db26354378 Fits 3150 3155 3640
There are various indicators that point the problems with your system’s fuel injector pump. Is there a metering rod or valve stuck? The de10 pump derives all if its injection timing information.
DB24354546R (04546 ; RE20511) Rebuilt Stanadyne Injection Pump fits
There may be error codes by doing this but it proves a point in testing. You can't use the old method of cracking each injector line to narrow it down because the injector pump doesn't have a pump for each cylinder. Pump to engine timing retarded.
This would be more pronounced when the engine is cold or at wide open throttle with no load.
Primary pump is supplying fuel to the injector pump, loosened fittings on injectors, no fuel at the injectors. I've got fuel to the injection pump but none to the injectors. It's just a pressure pump. Mechanical linkage or 2 wires to middle between the injector lines?
The document provides troubleshooting tips for various issues that can occur with stanadyne fuel injection pumps, including starting and stalling issues, no start conditions, low power, smoke. We have seen the tone wheel on the crankshaft come loose causing erratic engine speed readings that can cause issues. What does the fuel pump look like? There are other issues which will prevent the engine.
How to lock the stanadyne fuel pump for removal John Deere USA Stop
Low compression coolant temperature too low.
I usually load it up with appropriate software to test. My money is with pirlbeck, fuel pump needs to be replaced. I suspect the electric shutoff isn't opening. However there are a lot of tests that can be done as well before having to connect.
I've checked current at the plug at the rear of the pump and i get 8.8 volts. Some of the tests on this system should be done using john deere service advisor software connected. Is there something i am overlooking? Low cranking speed can be a sign that your stanadyne pump isn’t generating enough.
DB24354546R (04546 ; RE20511) Rebuilt Stanadyne Injection Pump fits
DB24354546DR (04546 ; RE20511) Rebuilt Stanadyne Injection Pump fits
